![]() ![]() It can also remove a wide variety of paints, including oil-based and latex paints, as well as varnishes and finishes. This paint remover can be used on several different types of surfaces-both wood and metal, for instance. For more complicated jobs, you’ll want to leave the paint on for a longer period of time, but most situations will be resolved in two minutes. It’s particularly adept at dealing with paint that’s in nooks and crannies or on textured surfaces. If you’re looking to speed up the process, try this fast-acting paint and varnish remover from Sunnyside Corporation. It works in mere minutes to remove several layers of paint. And that waiting time in the middle can eat up a big chunk of your day. ![]() In many cases, paint removers require a great deal of time to take action-you have to apply, then wait, then remove. Thinner consistency than many other strippers Type: Low VOCs | Container Size: 1 quart | Application Methods: Brush | Consistency: Gel | Safe for Interior Use: Yes In fact, Citristrip remains wet for up to 24 hours, making it ideal for situations where you need to remove multiple layers of paint. Just be patient: While the paint will likely begin to bubble as soon as you apply the product, the paint remover may need to be on the surface for several hours to fully remove the paint. ![]() And while it may be lacking in some harsh chemicals (like NMP and methylene chloride), Citristrip is highly effective at removing paint from surfaces. One of the most appealing aspects of this paint remover is its scent: Instead of the typical odor of most products of this type, it offers a fresh citrus smell. Plus, it can be used on several types of surfaces-wood, metal, and masonry, including brick and concrete-removing several layers of paint in one go. This paint remover is effective at removing several types of paint and varnish, including latex-based paint, oil-based paint, shellac, varnish, and polyurethane. Our top recommendation for removing paint is Citristrip. The Spruce Home Improvement Review Board.They'll absorb the liquid and are abrasive enough to allow you to scrub the surface clean while gentle enough not to damage the wood. A quick way to get the gunk off once the stripper has done it's work is to use handfuls of pine hamster bedding from a pet store. If it's a stubborn finish, apply a think layer of stripper and lay a piece of plastic wrap on top to keep the solvents from evaporationg and you can leave it a half hour or so to attack the finish. Lacquer thinner is quickest, but naptha or mineral spirits will do as well. ![]() After any stripper you use you'll need to wash down the surface to remove the wax residue from the stripper (added to retard evaporation and allow the stripper to work longer). I like using Citri-Strip as it's effective and not as harsh as many others. If not, then I'd suggest using another kind. These strippers are methyl ethyl ketone (MEK) based. If you have multiple layers of finish to remove, then bottom-up is the way to go. The basic difference between the "stronger" types and the "safer" types in use is that the former works by soaking through and stripping from the bottom up the latter works from the top down. If you're just removing a clear finish or a single layer of paint any stripper will work just fine. ![]()
0 Comments
Leave a Reply. |